D-Link DSA-3200 Información técnica descargar pdf (Pagina 32)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

Severity Name. Select Critical to send only critical events to the Switch’s log or SNMP agent.

Choose Warning to send critical and warning events to the Switch’s log or SNMP agent.

Select Information to send informational, warning, and critical events to the Switch’s log or

SNMP agent.

Click Apply to implement the new System Severity Settings.

MAC Address Aging Time

Users can configure the MAC Address aging time on the Switch.

To view the following window, click Configuration > MAC Address Aging Time:

Figure 2 – 20. MAC Address Aging Time window

The following parameter may be configured or viewed:

Parameter Description

MAC Address

Aging Time (10-

875)

Specify the length of time a learned MAC Address will remain in the forwarding table without

being accessed (that is, how long a learned MAC Address is allowed to remain idle). To change

this, type in a different value to represent the MAC address age-out time in seconds. The MAC

Address Aging Time can be set to any value between 10 and 875 seconds. The default setting

is 300 seconds.

Click Apply to set the MAC Address Aging Time.

Web Settings

Users can configure the Web settings on the Switch.

To view the following window, click Configuration > Web Settings:

Figure 2 – 21. Web Settings window

The following parameters may be configured or viewed:

Parameter Description

Web Status

Web-based management is Enabled by default. If you choose to disable this by clicking

Disabled, you will lose the ability to configure the system through the web interface as soon as

these settings are applied.

Port (1-65535)

The TCP port number used for Web-based management of the Switch. The “well-known” TCP

port for the Web protocol is 80.

Click Apply to set the web settings.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 320 321

Sin comentarios

D-Link DSA-3200 Información técnica Pagina 32