D-Link DSL-502T Manual de usuario

DSL-502T ADSL Router User’s Guide First Edition (February 2004) 651DSL502T01

DSL-502T DSL Router User’s Guide Web Browser Any common web browser can be used to configure the Router using the web configuration management softwar

DSL-502T DSL Router User’s Guide Information you will need from your ADSL service provider: Username This is the Username used to log on to your ADSL

DSL-502T DSL Router User’s Guide Information you will need about your LAN or computer: Ethernet NIC If your computer has an Ethernet NIC, you can conn

DSL-502T DSL Router User’s Guide Installing the USB Driver The CD-ROM shipped with the Router contains the USB driver software. 1. Insert the DSL-5

DSL-502T DSL Router User’s Guide 5. Click the Next button. 6. Check “CD-ROM drives" (as shown above) if you are using the USB driver include

DSL-502T DSL Router User’s Guide 7. Connect the Ethernet cable if you have not done so. 8. Connect the ADSL cable if you have not done so. Remembe

DSL-502T ADSL Router User’s Guide 1 Introduction This section provides a brief description of the Router, its associated technologies and a list of R

DSL-502T ADSL Router User’s Guide Router Features The DSL-502T ADSL Router utilizes the latest ADSL enhancements to provide a reliable Internet porta

DSL-502T ADSL Router User’s Guide Standards Compatibility and Compliance The DSL-502T complies with or is compatible with the following standards as

DSL-502T DSL Router User’s Guide FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

DSL-502T ADSL Router User’s Guide Packing List Open the shipping carton and carefully remove all items. In addition to this User's Guide, ascert

DSL-502T ADSL Router User’s Guide Rear Panel Connections All cable connections to the Router are made at the rear panel. Connect the power adapter he

DSL-502T ADSL Router User’s Guide 2 Hardware Installation The DSL-502T maintains three separate interfaces, an Ethernet, a USB and an ADSL interface.

DSL-502T ADSL Router User’s Guide Network Connections Network connections are provided through the ADSL port, the Ethernet port and the USB port on

DSL-502T ADSL Router User’s Guide Computer to Router Connection You can connect the Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) i

DSL-502T ADSL Router User’s Guide 3 Basic Router Configuration The first time you setup the Router it is recommended that you configure the WAN conne

DSL-502T ADSL Router User’s Guide Configure Windows XP for DHCP Use the following steps to configure a computer running Windows XP to be a DHCP clien

DSL-502T ADSL Router User’s Guide 3. In the General tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP) under “Th

DSL-502T ADSL Router User’s Guide 4. Select “Obtain an IP address automatically” by clicking once in the circle. Click the OK button. Your compute

DSL-502T ADSL Router User’s Guide Windows ME First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the St

DSL-502T ADSL Router User’s Guide Warranty and Registration for all Countries and Regions Except USA Wichtige Sicherheitshinweise 1. Bitte lesen Sie

DSL-502T ADSL Router User’s Guide Configure Windows 95 and Windows 98 for DHCP 1. Open the Control Panel window, and then click the Network icon. 2.

DSL-502T ADSL Router User’s Guide Access the Configuration Manager Now that your computer’s IP settings allow it to communicate with the Router, you

DSL-502T ADSL Router User’s Guide Use the default user name admin and password admin for first time setup. You should change the web-based manager ac

DSL-502T ADSL Router User’s Guide Setup Menu The Setup window offers links to menus to configure settings for the LAN (Local Area Network) and for th

DSL-502T ADSL Router User’s Guide DSL (Modulation) Settings The DSL Setup menu is used to change the Modulation Type used for the ADSL connection. T

DSL-502T ADSL Router User’s Guide Configure Connection 1 for PPPoA PPP or Point-to-Point protocol is a standard method of establishing a network conn

DSL-502T ADSL Router User’s Guide 9. To save the changes made to Connection 1, click the Tools tab and then click on the System Commands button. Cli

DSL-502T ADSL Router User’s Guide 1. Click the Connection 1 button under WAN Setup to view the default PPPoA Connection Setup configuration menu. 2.

DSL-502T ADSL Router User’s Guide Figure 3-7. Setup – Configure Connection 1 for Bridge To configure the WAN connection for Bridge, perform the step

DSL-502T ADSL Router User’s Guide Configure Connection 1 for Static IP for WAN Static is used whenever a known static IP is assigned. The accompanyin

DSL-502T DSL Router User’s Guide LIMITATION OF LIABILITY IN NO EVENT WILL D-LINK BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA, LOSS OF PROFITS,

DSL-502T ADSL Router User’s Guide 10. Click the Apply button when you have entered all the information. The web browser will briefly go blank. You a

DSL-502T ADSL Router User’s Guide 5. Leave the default QoS values if you are unsure or the ISP did not provide this information. 6. Do not change th

DSL-502T ADSL Router User’s Guide 2. Select CLIP from the Type: pull-down menu. This action will change the menu so it offers different settings for

DSL-502T ADSL Router User’s Guide New Connection Example 1 - Create a New PPPoE Connection The example below describes how to set up a new connection

DSL-502T ADSL Router User’s Guide New Connection Example 2 - Create a New Bridge Connection You may create new connections to suit different purposes

DSL-502T ADSL Router User’s Guide DHCP Configuration for LAN The Router supports three DHCP modes for the LAN. By default, DHCP service is provided u

DSL-502T ADSL Router User’s Guide Enable DHCP Relay Some service providers provide DHCP service for private networks from their own servers. To enabl

DSL-502T ADSL Router User’s Guide Management IP The IP address of the Router can be changed to suit the requirements of your LAN. Remember, if you ar

DSL-502T ADSL Router User’s Guide Save Configuration Changes Any changes made to the Router’s configuration must be saved to non-volitile memory or t

DSL-502T ADSL Router User’s Guide Figure 3- 17. Available System Commands To save the new settings, click on the Save All button. It will take a se

DSL-502T ADSL Router User’s Guide Warranty and Registration Information for USA Only Subject to the terms and conditions set forth herein, D-Link Sy

DSL-502T ADSL Router User’s Guide 4 Advanced Router Management Click the Advanced tab to access menus used to configure UPnP, Port Forwarding, Acc

DSL-502T ADSL Router User’s Guide UPnP UPnP supports zero-configuration networking and automatic discovery for many types of networked devices. When

DSL-502T ADSL Router User’s Guide LAN Clients The LAN Clients menu is used when establishing Port Forwarding, Access Control and Advanced Security ru

DSL-502T ADSL Router User’s Guide Port Forwarding Port Forwarding allows specific functions to bypass NAT protection that would otherwise not allow t

DSL-502T ADSL Router User’s Guide You may also create customized rules to manage TCP/UDP ports. The pre-configured rules include those listed in the

DSL-502T ADSL Router User’s Guide The User category for port forwarding is used to set up customized port forwarding rules. Figure 4- 5. Set up Cus

DSL-502T ADSL Router User’s Guide Figure 4- 6. Port Forwarding User Rules Management 2. Type a Rule Name in the space provided. 3. Select the port

DSL-502T ADSL Router User’s Guide Access Control Access Control settings are used to block various services and protocols for specific client IP addr

DSL-502T ADSL Router User’s Guide Access Control pre-configured rules are the same as for port forwarding: Category Available Rules Games: Alien vs

DSL-502T ADSL Router User’s Guide Advanced Security Use the Advanced Security features of the Router to globally enable or disable NAT and Firewall p

DSL-502T DSL Router User’s Guide What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Link’s judgment, hav

DSL-502T ADSL Router User’s Guide DMZ IP Address A DMZ address is used for a device that is not given basic protection of NAT and Firewall services.

DSL-502T ADSL Router User’s Guide Multicast Pass-through Multicast pass-through can be enabled or disabled for any WAN connection. When enabled it al

DSL-502T ADSL Router User’s Guide Static Routing Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route dat

DSL-502T ADSL Router User’s Guide Dynamic Routing The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devic

DSL-502T ADSL Router User’s Guide Multiple Virtual Connections The Router can use up to eight simultaneous PVC connections. These additional connecti

DSL-502T ADSL Router User’s Guide Tools and Utility Menus The menus lited under the Tools tab are used for System Commands to save settings, restart

DSL-502T ADSL Router User’s Guide User Management It is a good idea to change the management user information used for the Router before or immediate

DSL-502T ADSL Router User’s Guide System Commands The System Commands are used to save settings to non-volatile memory, to reboot the Router and to r

DSL-502T ADSL Router User’s Guide Remote Log Us the Remote Log menu to set up logging to servers or computers that are located outside the LAN or sub

DSL-502T ADSL Router User’s Guide Update Gateway Use the Update Gateway feature to load the latest firmware for the device. You can obtain the latest

TABLE OF CONTENTS About This User’s Guide ...

DSL-502T ADSL Router User’s Guide Ping Test The Ping Test menu allows you to ping any IP address from the Router to test connectivity to the address.

DSL-502T ADSL Router User’s Guide OAM Test The OAM Test menu is used for trouble shooting connection problems on the WAN interface. You can test for

DSL-502T ADSL Router User’s Guide Status Menus Use the Status windows to display various performance data about the Router Figure 4-20. Status displ

DSL-502T ADSL Router User’s Guide Network Statistics Figure 4-21. Network Statistics window Choose the desired interface at the top of the window an

DSL-502T ADSL Router User’s Guide Connection Status Figure 4-22. Connection Status window Click Refresh to view connection status information. DHCP

DSL-502T ADSL Router User’s Guide Modem Status This window displays DSL statistics and various modem status data. Figure 4-24. Modem Status window

DSL-502T ADSL Router User’s Guide System Log The system log displays chronological event log data. Figure 4-26. System Log window Click Refresh to g

DSL-502T ADSL Router User’s Guide A Technical Specifications GENERAL Standards: ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) ITU G.994.1 (G.Hs) ITU-T Rec

DSL-502T ADSL Router User’s Guide Physical and Environmental DC Inputs: Power Adapter: Input: 100V ~ 240V AC 50 ~ 60Hz Output: 9V AC, 1A Power Con

DSL-502T ADSL Router User’s Guide B IP Address Setup The DSL-502T is designed to provide network administrators maximum flexibility for IP addressing

Remote Log...

DSL-502T ADSL Router User’s Guide address (each computer must have a unique address to distinguish it on the network). The IP address scheme used in

DSL-502T ADSL Router User’s Guide C IP Concepts This appendix describes some basic IP concepts, the TCP/IP addressing scheme and show how to assign I

DSL-502T ADSL Router User’s Guide Networks attached to the Internet are assigned class types that determine the maximum number of possible hosts per

DSL-502T ADSL Router User’s Guide Subnet Mask In the absence of subnetworks, standard TCP/IP addressing may be used by specifying subnet masks as sho

DSL-502T ADSL Router User’s Guide D Microfilters and Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL l

DSL-502T ADSL Router User’s Guide Line Splitter If you are instructed to use a “line splitter”, you must install the device between the Modem and the

Offices Australia D-Link Australia 1 Giffnock Avenue, North Ryde, NSW 2113, Sydney, Australia TEL: 61-2-8899-1800 FAX: 61-2-8899-1868 TOLL

India D-Link India Plot No.5, Bandra-Kurla Complex Rd., Off Cst Rd., Santacruz (East), Mumbai, 400 098 India TEL: 91-022-652-6696/6578/6623

U.A.E. D-Link Middle East CHS Aptec (Dubai), P.O. Box 33550 Dubai, United Arab Emirates TEL: 971-4-366-885 FAX: 971-4-355-941 E-MAIL: Wxavier

DSL-502T DSL Router User’s Guide About This User’s Guide This user’s guide provides instructions on how to install the DSL-502T ADSL Router and use it

Registration Card Print, type or use block letters. Your name: Mr./Ms__________________________________________________________________________ Orga