D-Link DSA-3110 Manual de usuario descargar pdf (Pagina 12)

DSA-3110 Hotspot Edition – User Manual

Picture 7. The same page in Russian.

Attention!

1. To keep the device settings in the non-volatile memory, you should save the changes on the

System > Configuration page (click the Save button).

2. The factory default settings can be restored via the web-based interface (System >

Configuration > Factory) or via the hardware Reset button. The hole of the button is

located on the back panel of the device next to the power connector. Use a small paperclip

to activate the button; insert it into the hole (with the device turned on), push, and hold for

10 seconds. If you act properly, first the Status LED turns off for 2 or 3 seconds, and then

the LED blinks fast for some seconds, which means the device is restoring the default

settings. After that the LED turns off for 2 or 3 seconds again, and then the device is

completely reset.

Page 12 of 61

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 60 61

Sin comentarios

D-Link DSA-3110 Manual de usuario Pagina 12