D-Link DP-G301 - Print Server - Parallel Manual de usuario descargar pdf (Pagina 2)

Next, make sure that the printer is turned OFF.

Connect the parallel port of the DP-G301 (shown below) to the parallel port

of the printer. Turn ON the printer.

Then, plug one end of the power adapter into the DP-G301 and the other

end into your electric outlet. The DP-G301 will turn on and begin a self-test.

Connecting The DP-G301 To Your

Network

For Mac OS printing, please refer to manual (.pdf) located on the CD-ROM.

Receptor for

AC Power

Adapter

Network Port

First, insert one end of a straight-through CAT5 Ethernet RJ-45 cable into

the “Network Port” (shown below.) Connect the other end of the cable to the

LAN port of the gateway or switch. Note: Do not connect the power cord to

the DP-G301 until you are advised to do so.

Parallel Port

Warning!

Only a parallel port printer may be connected to the parallel port of the DP-G301.

Do not connect any other parallel port device to the parallel port; doing so may

damage the unit, voiding the warranty for this product.

1 2 3 4 5 6 7 ... 71 72

Sin comentarios

D-Link DP-G301 - Print Server - Parallel Manual de usuario Pagina 2