D-Link xStack Instrucciones de operaciones descargar pdf (Pagina 41)

DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual

Port Configurations

This section contains information for configuring various attributes and properties for individual physical ports, including

port speed and address learning. Clicking on Port Configurations in the Administration menu will display the following

window for the user:

Figure 6- 3. Port Configuration and The Port Information Table window

To configure switch ports:

1. Choose the port or sequential range of ports using the From…To… port pull-down menus.

2. Use the remaining pull-down menus to configure the parameters described below:

Parameter Description

State <Enabled>

Toggle the State <Enabled> field to either enable or disable a given port or group

of ports.

Speed/Duplex <Auto>

Toggle the Speed/Duplex field to either select the speed and duplex/half-duplex

state of the port. Auto denotes auto-negotiation between 10 and 100 Mbps

devices, in full- or half-duplex. The Auto setting allows the port to automatically

determine the fastest settings the device the port is connected to can handle, and

then to use those settings. The other options are Auto, 10M/Half, 10M/Full,

100M/Half and 100M/Full, 1000M/Full_M and 1000M/Full_S. There is no

automatic adjustment of port settings with any option other than Auto.

The Switch allows the user to confi

ure three t

es of

abit connections;

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 185 186

Sin comentarios

D-Link xStack Instrucciones de operaciones Pagina 41