D-Link DSA-3200 Especificaciones descargar pdf (Pagina 3)

A. Power on the DSA-3200.

B. Connect an Ethernet cable from a Public LAN port to a switch or wireless access

point on your public network. The Public LAN LED will illuminate to indicate a

proper connection. If the Public LAN LED doesn’t light up, please check the

connections.

C. Connect an Ethernet cable from a Private LAN port to an Ethernet port on your

private network’s switch. If properly connected, the Private LAN LED will illuminate.

(Note: For configuration purposes a computer can be connected directly to this

port using a standard Ethernet cable)

D. Attach an Ethernet cable to the WAN port on the back panel of the DSA-3200.

Connect the other end to a router or directly to a broadband modem. The WAN

LED light will illuminate to indicate proper connection.

Connecting The DSA-3200 To Your Network

(continued)

When you have completed the steps in this Quick Installation Guide, your connected

network should look similar to this:

1 2 3 4 5 6 7 8 ... 11 12

Sin comentarios

D-Link DSA-3200 Especificaciones Pagina 3