D-Link DSL-321B Manual de usuario Pagina 12
- Pagina / 44
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Section 2 – Installation
D-Link DSL-321B User Manual
12
Power on Modem
The Modem must be used with the power adapter included with the device.
1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Modem and plug the adapter into a suitable nearby
power source.
2. Depress the Power button into the on position. You should see the Power LED indicator light up and remain lit. The Status LED should light solid
green and begin to blink after a few seconds.
3. If the Ethernet port is connected to a working device, check the Ethernet Link/Act LED indicators to make sure the connection is valid. The
Modem will attempt to establish the ADSL connection, if the ADSL line is connected and the Modem is properly configured this should light up
after several seconds. If this is the first time installing the device, some settings may need to be changed before the Modem can establish a
connection.
Factory Reset Button
The Modem may be reset to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the
following sequence:
1. Press and hold the reset button while the device is powered off.
2. Turn on the power.
3. Wait for 5~8 seconds and then release the reset button.
Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings. The device settings
will be restored to the factory default IP address 192.168.1.1 and the subnet mask is 255.255.255.0, the default management Username is “admin”
and the default Password is “admin.”
- Table of Contents 2
- Package Contents 3
- System Requirements 3
- Features 4
- Hardware Overview 5
- Installation 7
- Device Installation 11
- Power on Modem 12
- Factory Reset Button 12
- Network Connections 13
- Quick Setup 15
- ADSL Setup 21
- PPPoE/PPPoA 22
- Static IP Address 23
- Bridge Mode 24
- LAN Setup 25
- Use the Modem for DHCP 26
- Disable the DHCP Server 26
- Time and Date 27
- Parental Control 28
- Advanced 29
- Advanced ADSL 30
- Maintenance 31
- Save/Restore Settings 32
- Firmware Update 33
- Diagnostics 34
- System Log 35
- Device Info 36
- Connected Clients 37
- Statistics 38
- Troubleshooting 40
- Networking Basics 42
- Technical Specifications 44
Relacionado con productos y manuales para Redes D-Link DSL-321B
Redes D-Link DNR-326 Manual de usuario
(6 paginas)
(6 paginas)
Redes D-Link DWL_7100 Manual de usuario
(13 paginas)
(13 paginas)
(99 paginas)
Redes D-Link DSR-150 Manual de usuario
(6 paginas)
(6 paginas)
Redes D-Link DVG-3016S Manual de usuario
(52 paginas)
(52 paginas)
Redes D-Link DIR-845L Manual de usuario
(155 paginas)
(155 paginas)
Redes D-Link DPH-50U Guía de usuario
(43 paginas)
(43 paginas)
Redes D-Link GO-DSL-N150 Manual de usuario
(24 paginas)
(24 paginas)
Redes D-Link DSL-G624T Manual de usuario
(100 paginas)
(100 paginas)
Redes D-Link DFL- 2500 Guía de instalación
(22 paginas)
(22 paginas)
Redes D-Link DFE-530TX_revC Manual de usuario
(9 paginas)
(9 paginas)
Redes D-Link DES-3226 Guía de usuario
(150 paginas)
(150 paginas)
Redes D-Link DSR-250 Guía de instalación
(78 paginas)
(78 paginas)
Redes D-Link DSL-310 Manual de usuario
(17 paginas)
(17 paginas)
Redes D-Link DFL- 800 Guía de instalación
(20 paginas)
(20 paginas)
Redes D-Link DCS-2230 Manual de usuario
(42 paginas)
(42 paginas)
Redes D-Link DSL-G624T Manual de usuario
(76 paginas)
(76 paginas)
Redes D-Link DGL-5500 Manual de usuario
(116 paginas)
(116 paginas)
Seagate TS-EC880 Pro manuály
Uživatelské manuály a uživatelské příručky pro NAS a úložné servery Seagate TS-EC880 Pro.
Poskytujeme 1 manuály pdf Seagate TS-EC880 Pro ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentarios a estos manuales