D-Link DVG-G1402S - Wireless Broadband VoIP Router Guía de instalación descargar pdf (Pagina 48)

Advanced > Routing > Static Route

The Routing table, shown to

the right, allows you to enter

static routes between

computers on both the WAN

(Internet) and your LAN.

IP Address Enter the IP Address of the subnet or device where packets are

to be routed.

Subnet Mask Enter the subnet mask corresponding to the IP address entered

above

Gateway Enter the IP address of the gateway used for packets that are

to be routed to the IP address entered above.

Interface Select the WAN (Internet) or LAN interface.

Metric Enter the number of hops (the number of routers) that packets

will be allowed to cross when being routed to the IP address

entered above.

State Use this drop-down menu to Enable or Disable this route.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Sin comentarios

D-Link DVG-G1402S - Wireless Broadband VoIP Router Guía de instalación Pagina 48