D-Link Wireless N Home Router DIR-615 Manual de usuario descargar pdf (Pagina 22)

22D-Link DIR-615 User Manual



Select  from

the drop-down menu.

Select Static if your ISP assigned you the IP

address, subnet mask, gateway, and DNS

server addresses. In most cases, select

.

Enter the IP address (Static PPPoE only).

Enter your PPPoE user name.

Enter your PPPoE password and then retype

the password in the next box.

Enter the ISP Service Name (optional).

Select either , , or

Manual.

Enter a maximum idle time during which the

Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.

Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).



the default MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not

recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s

 button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.

Connection:

Address Mode:

IP Address:

User Name:

Password:

Service Name:

Reconnection Mode:

Maximum Idle Time:

DNS Addresses:

MTU:

MAC Address:

PPPoE (DSL)

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide

you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE

software from your computer. The software is no longer needed and will not work through a router.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 115 116

Sin comentarios

D-Link Wireless N Home Router DIR-615 Manual de usuario Pagina 22