D-Link DP-802 Guía de usuario descargar pdf (Pagina 46)

Internet/Print Server User’s Guide

Print Server Setup34

3. Confirm that your network is operating normally.

4. Connect the internet/print server to the network (through the

RJ-45 port on the print server’s rear panel).

5. While the printer is powered off, install a printer cable to con-

nect its parallel port to the printer port of the internet/print

server.

6. Switch printer power on.

7. Plug the AC power adapter’s output plug into the power input

socket on the rear panel of the internet/print server.

8. Plug the AC power adapter into an electric service outlet. This

will supply power to the internet/print server. (The server has

no power switch).

Connecting a Printer

Print Server Configuration

Print server configuration and operation is controlled through the

same Telnet console or browser interface as the WAN port and other

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 99 100

Sin comentarios

D-Link DP-802 Guía de usuario Pagina 46