D-Link xStack Guía de usuario descargar pdf (Pagina 99)

xStack Storage Management Center Software User’s Guide 89

Figure 6-3. Ping from Management Port Dialog Box

3. In the Ping to field, type the IP address of the destination device you want to ping.

4. Click OK.

The results of the ping appear in the Ping Results field.

5. If the ping is successful, click the Close button. If the ping fails, verify that the

Management Center's IP address is not active elsewhere on the network.

6.3 Viewing Ethernet Port Settings or Changing the MTU Setting

You can view the settings of the xStack Storage's Ethernet (iSCSI) ports and change the port’s

maximum transmission unit (MTU) setting. If you change the MTU setting, you must restart

the xStack Storage for the new setting to take effect.

To view Ethernet port settings and/or change the MTU setting:

1. In the Network Settings View, click an Ethernet port in the Main Display.

The Port tab shows the settings for the selected Ethernet port (see Figure 6-4).

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 136 137

Sin comentarios

D-Link xStack Guía de usuario Pagina 99