D-Link DAP-3220 Manual de usuario descargar pdf (Pagina 53)

DAP-3220 User’s Manual

D-Link Wireless 108G Exterior Access Point

Tool > Administrator Settings (continued)

Status:

Status is Enabled by default. Uncheck the box to disable the console.

Console Settings

Console Protocol: Select the type of protocol you would like to use, Telnet or SSH.

SNMP Settings

Public Community

String:

Enter the public SNMP community string.

Status: Status is Enabled by default. Uncheck the box to disable the SNMP

functions.

Private Community

String:

Enter the private SNMP community string.

Trap Status:

Check the box to enable the trap status.

Trap Server IP:

Enter the trap server IP address. This is the IP address of the SNMP

manager to receive traps sent from the wireless access point.

Trap Type:

You can specify what kind of trap type (System, Wireless) should be sent

to the trap server.

Ping Control

Setting:

Check the box to enable Ping control. Ping works by sending ICMP “echo

request” packets to the target host and listening for ICMP echo response

replies. By disabling the Ping control setting, the AP will not respond to

the ICMP echo request packets. Default is set to enabled..

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 68 69

Sin comentarios

D-Link DAP-3220 Manual de usuario Pagina 53