D-Link DAP-3310 Manual de usuario descargar pdf (Pagina 4)

4  D-Link DAP-3310/DAP-3410 Quick Install Guide

ENGLISH

PoE Passthrough

5

The LAN 2 port can be connected to D-Link

cameras that require up to 7 watts, such as the

DCS-3716, DCS-6113, and DCS-7110. It can

also be connected to a router or a switch.

A. Power on the AP through the PoE kit (as

in STEP 4) and connect the camera to

the LAN 2 port.

B. Log in to the web UI and enable PoE

Passthrough in Maintenance to power on

the camera.

5

Conguration

If you are configuring the AP locally,

connect a PC to the PoE Injector DATA IN

port using an Ethernet cable.

A. Assign a static IP address to your PC

that is in the same network segment as

the device. As the default IP address

of this unit is 192.168.0.50, you may

choose any address from 192.168.0.1 to

192.168.0.254, except 192.168.0.50.

B. Open a web browser and go to

http://192.168.0.50. Enter admin as

your username and leave the password

blank to log in to the web UI. Now you

can configure the AP through the web UI.

STEP 4: Connect the AP to Your Network

4

This product uses a proprietary PoE design and

can only be used with the included PoE injector.

A. Connect the Ethernet cable that is

connected to the AP from STEP 1 to the

P+DATA OUT port on the PoE Injector.

B. Connect an Ethernet cable from a router,

switch, or PC to the DATA IN port on the

PoE Injector.

C. Attach the power adapter to the connector

labeled POWER IN on the PoE Injector,

and plug it into an electrical outlet.

STEP 3: Connect Grounding Wire

A grounding wire is to protect your device

from lightning strikes and the buildup of

static electricity.

A

C

B

P+DATA OUT

DATA IN

PoE Injector

4

POWER IN

Router or Switch Computer

AP

LAN (PoE)

4

PoE Injector

4

Router or Switch Computer

AP

Camera

5

LAN 2

5

LAN (PoE)

4

1 2 3 4 5 6 7 8 9 ... 23 24

Comentarios a estos manuales

Sin comentarios