
34
DAP-3220 User’s Manual
D-Link Wireless 108G Exterior Access Point
Security:
The Multi-SSIDs security can be WPA/WPA2-Enterprise or
WPA-Auto-Enterprise only when the Primary SSID’s security is at
the same security level. Also. They must also connect to the same
RADIUS server.
VLAN ID:
If you are enabling Guest access and congure Internal and Guest
networks on the VLAN, this eld will also be enabled.
Provide a number between 1 and 4094 for the Internal VLAN.
This will cause the access point to send DHCP requests with the
VLAN tag. The switch and the DHCP server must support VLAN
IEEE802.1Q frames. The access point must be able to reach the
DHCP server.
Check with the Administrator in regards to VLAN and DHCP
congurations.
Select Enable or Disable .
Select Hex or ASCII.
Select from 64-Bits, 128-Bits, and 152-Bits.
Select from the 1st to 4th key to be set as the active key
Key Type:
Key Size:
Key:
When Primary SSID is set to any of
the following security levels:
Multi-SSID can use any of these
security levels:
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WPA-Enterprise
WPA2-Enterprise
WPA-Auto-Enterprise
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WPA-Enterprise
WPA2-Enterprise
WPA-Auto-Enterprise
WMM:
Comentarios a estos manuales