D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway Especificaciones descargar pdf (Pagina 14)

Using the DPG-2000W (Continued)

Using Your Wireless Configuration Utility

Select the SSID matching

the DPG-2000W’s SSID

displayed on the banner

screen.

The banner page on the projector/monitor screen will display the SSID and the

channel that the DPG-2000W is currently set on. The channel number ranges

from 1 – 11 for the US or 1 – 13 for Europe and Japan.

The DPG-2000W operates as an Access Point (AP), with an SSID automatically

assigned at each boot up. When the DPG-2000W starts up, its SSID will be

displayed on the upper left corner of the monitor/projector.

Wireless configuration will vary depending on the manufacturer of the wireless

card that you are using. Open the Wireless Configuration Utility program (which

may be called a different name) provided by the manufacturer of your wireless

card and modify the settings as follows:

Change the network type to “Infrastructure” mode.

Change the “SSID” of the wireless network adapter corresponding to

the DPG-2000W’s SSID displayed on the banner page.

Your wireless configuration utility will indicate if a proper wireless

connection is established between the wireless card and the DPG-

2000W.



1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Sin comentarios

D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway Especificaciones Pagina 14