D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway Especificaciones descargar pdf (Pagina 38)

1. Turn on or reboot the DPG-2000W.

2. During the boot-up screen, wait for a “Reset to factory default” timer

starts message to appear.

Tap on the hardware reset button or power cycle to reboot the

DPG-2000W before the timer ends (10 seconds), and the DPG-2000W

will revert back to factory default settings.

4. During the next boot-up screen, a Reset to Factory Default message

should appear next to the Timer message, indicating a successful

hardware reset.

Reset to Factory Defaults

The hardware reset button is located at the back of the DPG-2000W. You can

use a bent paper clip to access the hardware reset button. The main function

of the hardware-reset button is to reboot the DPG-2000W. To reboot the

DPG-2000W, only a light tap on the reset button is required.

Warning

Please note that resetting the DPG-2000W to its factory default settings

will erase all configurations and encryption information you may have set

through the web interface.

To reset the DPG-2000W back to the factory default settings, follow the

steps below:

Push Reset

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Sin comentarios

D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway Especificaciones Pagina 38