D-Link DWL-2000AP - AirPlus Xtreme G Especificaciones descargar pdf (Pagina 19)

Using the Configuration Menu (continued)

Advanced > Performance

Preamble Type-

Select Short or Long Preamble. The Preamble defines the length

of the CRC block for communication between the wireless access

point and the roaming wireless network adapters. (Cyclic Redun-

dancy Check is a common technique for detecting data transmis-

sion errors.) Long is the default setting. Note: High network traffic

areas should use the shorter preamble type.

Beacon Interval-

Beacons are packets sent by an Access Point to synchronize a

wireless network. Specify a value. 100 is the default setting and is

recommended.

RTS Threshold-

This value should remain at its default setting of 2432. If inconsistent

data flow is a problem, only a minor modification should be made.

Fragmentation-

The fragmentation threshold, which is specified in bytes, determines

whether packets will be fragmented. Packets exceeding the 2346

byte setting will be fragmented before transmission. 2346 is the de-

fault setting

Apply-

Click Apply to save changes

DTIM interval-

(Delivery Traffic Indication Message)- 3 is the default setting. DTIM

is a countdown informing clients of the next window for listening to

broadcast and multicast messages.

TX Rates-

The DWL-2000AP will automatically sense the best possible speed

when you select Auto (the default setting), or you can choose the

data transfer rate: 54Mbps,48Mbps, 36Mbps, 24Mbps, 18Mbps,

12Mbps, 11Mbps, 9Mbps,6Mbps, 5.5Mbps, 2Mbps, 1Mbps.

Authentication-

Open System - communicates the key across the network

Shared Key - devices must have identical WEP settings to

communicate

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 52 53

Sin comentarios

D-Link DWL-2000AP - AirPlus Xtreme G Especificaciones Pagina 19