D-Link DWL-2100AP - AirPlus Xtreme G Guía de instalación descargar pdf (Pagina 25)

Using the Conﬁguration Menu (continued)

Home > Wireless>AP Client Mode(continued)

Remote AP Mac

Address or

Site Survey-

will transform any IEEE 802.3 device(e.g., a computer, printer,

etc.). into an 802.11b wireless client when it communicates with

another DWL-2100AP that is acting as the root AP. Enter the MAC

address of the root AP or site survey to choose the root AP in your

network.

Authentication-

Select Open System to communicate the key across the network.

Select Shared Key to limit communication to only those devices

that share the same WEP settings.

Select Open System/Shared Key to allow either form of data

encryption.

Select WPA-PSK to communicate using WPA encryption

Open System-

When Open System is selected , the following ﬁeld will be conﬁgurable.

other methods of authentication will have different conﬁguration ﬁelds.

Encryption-

Select Disable or Enable(Disable is selected here .

Key Type-

Select HEX or ACII.

Key Size-

Select 64-,128-,152- bits.

Valid Key-

Select the 1st through the 4th key to be the active key.

WPA mode-

PSK - The Pre-Shared Key mode of WPA does not require the

inclusion of a RADIUS server in your networks.

Passphrase-

If you selected PSK you will need to enter a Passphrase in this

ﬁeld.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 90 91

Sin comentarios

D-Link DWL-2100AP - AirPlus Xtreme G Guía de instalación Pagina 25