D-Link DWL-2100AP - AirPlus Xtreme G Guía de instalación descargar pdf (Pagina 54)

Using the AP Manager (continued)

• DHCP Server: Enable or disable the DHCP server function.

Device Conﬁguration>DHCP

• IP Assigned From: Enter the initial IP address to be assigned by the DHCP server.

• Range of Pool (1~255): Enter the number of allocated IP addresses.

• SubMask: Enter the subnet mask.

• Gateway: Enter the gateway IP address, typically a router.

• Wins: Wins (Windows Internet Naming Service) is a system that determines the IP

address of a network computer with a dynamically assigned IP address, if applicable.

• DNS: The IP address of the DNS server, if applicable.

• Domain Name: Enter the domain name of the DWL-2100AP, if applicable.

• Lease Time: The period of time that the client will retain the assigned IP address.

• Status: This option turns the dynamic pool settings on or off.

• Dynamic Pool Settings: Click to enable Dynamic Pool Settings. Conﬁgure the IP

address pool in the ﬁelds below.

• Static Pool Settings: Click to enable Static Pool Settings. Use this function to assign the

same IP address to a device at every restart. The IP addresses assigned in the Static

Pool list must NOT be in the same IP range as the Dynamic Pool.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 90 91

Sin comentarios

D-Link DWL-2100AP - AirPlus Xtreme G Guía de instalación Pagina 54