D-Link DES-3326S - Switch - Stackable Guía de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Identifying External Components 37
Switch LED Indicators
The LED indicators of the Switch include Power, Console, and
Link/Act. The following shows the LED indicators for the
Switch along with an explanation of each indicator.
Figure 3-12. The LED Indicators
Power This indicator on the front panel should be lit
during the Power-On Self Test (POST). It will light green
approximately 2 seconds after the switch is powered on to
indicate the ready state of the device.
Console This indicator is lit green when the switch is
being managed via out-of-band/local console
management through the RS-232 console port using a
straight-through serial cable.
Act/Link These indicators are located to the left and right of each
port. They are lit when there is a secure connection (or link) to a
device at any of the ports. The LEDs blink whenever there is reception
or transmission (i.e. Activity--Act) of data occurring at a port.
Stacking Module LED Indicators
The switch’s current order in the switch stack is also displayed
on the Stacking Module’s front panel under the STACK NO.
heading:
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 348 349

Comentarios a estos manuales

Sin comentarios