D-Link DWL-1800 Especificaciones descargar pdf (Pagina 35)

Using the AP Manager (continued)

Device Configuration>Wireless

• SSID: The Service Set (network)

Identifier of your wireless network.

• Channel: Allows you to select a

channel between 1-11.

• SSID Broadcast: Allows you to

enable or disable the broadcasting of

the SSID to network clients.

• 11g only: When enabled, only 802.11g

devices can connect to the selected

device(s).

• Super G: Super G is a group of

performance enhancement features

that increase end user application

throughput in an 802.11g network.

Super G is backwards compatible with

standard 802.11g devices. For ideal performance, all wireless devices on the network

should be Super G capable. The modes are listed below:

• Radio Wave: Enable or disable the wireless functionality of the selected device(s).

• Data Rate: A pulldown menu to select the maximum wireless signal rate for the

selected devices(s).

• Beacon Interval (20~1000): Beacons are packets sent by an access point to

synchronize a network. Specify the beacon value for the selected device(s) here. The

default value of 100 is recommended.

• DTIM (1~255): DTIM (Delivery Traffic Indication Message) is a countdown informing

clients of the next listening window for broadcast and multicast messages.

• Fragment Length (256~2346): This sets the fragmentation threshold (specified in

bytes). Packets exceeding the value set here will be fragmented. The default is 2346.

• RTS Length (256~2346): The RTS value should not be changed unless you encounter

inconsistent data flow. The default value is 2346.

• Tx Power: A pulldown menu for selecting the transmit power of the selected device(s).

Super G Mode Function

Disabled

Standard 802.11g support. No enhanced

Super G without Turbo

Capable of Packet Bursting, FastFrame

Super G with Dynamic Turbo

Capable of Packet Bursting, FastFrame

setting is backwards compatible with no

only enabled when all devices on the wir

Dynamic Turbo enabled.

Super G with Static Turbo

Capable of Packet Bursting, FastFrame

setting is not backwards compatible with

always on and is only enabled when all d

with Super G and Static Turbo enabled.

Downloaded from www.Manualslib.com manuals search engine

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 57 58

Comentarios a estos manuales

Sin comentarios

D-Link DWL-1800 Especificaciones Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Puntos de acceso wlan D-Link DWL-1800