D-Link DI-304M Guía de usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 117
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
56
Connecting the Transceiver System
Multi-Pin Cable Assemblies Used with the CopperHead 3400 Camera Unit
Multi-Pin Cable Assemblies Used with the CopperHead 3400 Camera Unit
A - Camera Remote Control (Remote) Connector
Connect this to the CCU input on your camera. The
Grass Valley supplied cable has a red
sleeve at the end to be connected to the CopperHead 3400 Camera Unit.
See Available Accessories on page 96 for a list of
Grass Valley supplied cables.
B - Data/GPI /Tally Connector
This connector carries a number of control, GPI and Tally signals.
See Base Station Breakout Data/GPI Cable on page 93 for wiring details.
C - Power Wafer Connector
Connect the supplied Power Wafer cable between this connector and the Power Wafer.
Connectors into and out of the CopperHead 3400 Camera Unit Back Side
Diagram # Description
3 Intercom Headset Out
XLR 5 Pin Female Connector – Provides two channels of two-way
intercom and the Intercom Program audio feed.
4 Audio 1 & 2 Out
XLR 5 Pin Male Connector – Provides Return Audio Out from camera for
Channels 1 & 2. Typically connected to a local monitor at the camera
position.
5 Audio 1 & 2 In
XLR 5 Pin Female Connector – Line level audio input. Typically fed by
short audio jumper cables from the Camera Audio 1 & 2 outputs (can
also take local audio device feeds from camera position).
6 Audio 3 & 4 Out
XLR 5 Pin Male Connector – Provides Return Audio Out from camera for
Channels 1 & 2. Typically connected to a local monitor at the camera
position.
7 Camera Remote Connector
Multi-Pin Connector A–10-Pin Hirose Connector cable,
normallysupplied by
Grass Valley, a Belden Brand. It connects the
Camera Unit to the Camera CCU in to allow operation of the Camera
Remote Control Panel. See Available Accessories on page 96 for a list of
available cables.
Power to the Camera Unit & Camera must be turned off when
connecting the Camera Remote Control Panel Cable– connecting with
the power on can seriously damage your equipment.
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 116 117

Comentarios a estos manuales

Sin comentarios