D-Link DI-304M Guía de usuario descargar pdf (Pagina 70)

Operating the Transceiver System

Setting-up the CopperHead 3400 Transceiver System

This section provides an overview of setup of the CopperHead 3400 Transceiver System for

operation. The following sections provide additional detail on each aspect of setup and

operation.

It is important that you do an initial setup and test of your CopperHead 3400 as soon as

your receive in order to confirm proper operation and to provide training to you and your

team prior to an actual production.

Use the following list of items as an overall checklist for setup:

1 It is highly recommended that you do not attempt to power up the system until all

connections are made and in particular the Fiber Optic Cable has been connected at

both ends.

If you need to power up either the CopperHead 3400 Base Station or Camera Unit,

make sure that the Fiber Connectors are securely capped. This will protect them from

damage or dirt and protect you from eye damage.

2 If it is the first time setting up the CopperHead 3400 Base Station, or your setup is not

permanent as it would likely be in a remote truck, stadium control room, or similar,

connect all required cables (see at Tactical Fiber between the Base Station and Camera

Unit on page 47). The order in which you connect the cables makes no difference.

• Make sure to connect the Camera Remote Control cable to the Base Station and

Remote Control Panel when the Base Station power is turned off.

• Keep Fiber Optic cable connectors capped until actually connecting the Fiber

Cable.

3 When setting up the CopperHead 3400 Camera Unit and associated Camera, you will

need to do the following:

• Setup the external power supply as required.

• For the MPS power supply used with the CopperHead Power Wafer,see SMPTE

Hybrid Fiber between the MPS Power Unit and Camera Unit on page 49.

• For the HDX power supply used with the Copperhead PowerPlus, see SMPTE

Hybrid Fiber between the HDX Power Unit and Camera Unit on page 50.

Make sure all cables running between the CopperHead 3400 Base Station and the

Power Supply and local AC power cords are properly managed and secured.

• Mount the Camera and CopperHead 3400 Camera Unit(see Mounting the

CopperHead 3400 Camera Unit to the Camera on page 40).

• Connect all required cables (see SMPTE Hybrid Fiber between the MPS Power Unit

and Camera Unit on page 49). The order in which you connect the cables makes no

difference.

• Make sure to connect the Camera Remote Control cable to the Camera Unit and

Camera when the Camera power is turned off.

• Set up the Intercom Talk Back switches and level controls as desired.

4 Deploy the Fiber Cable – you are now ready to Power Up the system.

You should read the Using Fiber Optics Guide for information on how to manage and

deploy your fiber optics cabling, safety precautions, tips & tricks, and recommendations

for creating complex fiber optic networks. You can find a copy of this document on the

Support portal (see Contact Us on page 83).

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 116 117

Comentarios a estos manuales

Sin comentarios

D-Link DI-304M Guía de usuario Pagina 70

Comentarios a estos manuales

Relacionado con productos y manuales para Redes D-Link DI-304M