D-Link DSA-3200 Información técnica descargar pdf (Pagina 241)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

227

To establish the rule for a previously created CPU Access Profile:

To configure the Access Rules for IP, open the CPU Access Profile List window and click Add/View Rules for a Packet Content

entry. This will open the following window.

Figure 7 - 41. CPU Access Rule List window for Packet Content

To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click the Add Rule

button:

Figure 7 - 42. Add Access Rule window for Packet Content

The following parameters can be cconfigured:

Parameter Description

Access ID (1-100) Type in a unique identifier number for this access. This value can be set from 1 to 100.

Action Select Permit to specify that the packets that match the access rule are forwarded by the Switch,

according to any additional rule added (see below).

Select Deny to specify that packets that match the access rule are not forwarded by the Switch

and will be filtered.

Offset

This field will instruct the Switch to mask the packet header beginning with the offset value

specified:

Offset 0-15 - Enter a value in hex form to mask the packet from the beginning of the packet to

the 15th byte.

Offset 16-31 - Enter a value in hex form to mask the packet from byte 16 to byte 31.

Offset 32-47 - Enter a value in hex form to mask the packet from byte 32 to byte 47.

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 320 321

Sin comentarios

D-Link DSA-3200 Información técnica Pagina 241