D-Link DSA-3200 Información técnica descargar pdf (Pagina 31)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

Figure 2 - 18. System Log Host window

The following parameters may be configured or viewed:

Parameter Description

Host ID Syslog server settings index (1 to 4).

Host IP Address

The Ipv4 address of the Syslog server.

UDP Port (514 or

6000-65535)

Type the UDP port number used for sending Syslog messages. The default is 514.

Severity

This drop-down menu allows you to select the level of messages that will be sent. The

options are Warning, Informational, and All.

Facility Use the drop-down menu to select Local 0, Local 1, Local 2, Local 3, Local 4, Local 5, Local

6, or Local 7.

Status Choose Enabled or Disabled to activate or deactivate.

To set the System Log Server configuration, click Apply. Click the Edit button to configure the specific entry. To delete an entry

from the System Log Host List table, click the corresponding Delete button next to the entry.

System Severity Settings

The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both. The level at which the alert

triggers either a log entry or a trap message can be set as well. Use the System Severity Settings window to set the criteria for

alerts. The current settings are displayed below the System Severity Table.

To view the following window, click Configuration > System Severity Settings:

Figure 2 - 19. System Severity Settings window

The following parameters may be configured or viewed:

Parameter Description

System Severity Choose how the alerts are used from the drop-down menu. Select Log to send the alert of the

Severity Type configured to the Switch’s log for analysis. Choose Trap to send it to an SNMP

agent for analysis, or select All to send the chosen alert type to an SNMP agent and the

Switch’s log for analysis.

Severity Level

Choose what level of alert will trigger sending the log entry or trap message as defined by the

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 320 321

Sin comentarios

D-Link DSA-3200 Información técnica Pagina 31