D-Link DSA-3200 Información técnica descargar pdf (Pagina 25)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

Flow Control

Displays the flow control scheme used for the various port configurations. Ports configured

for full-duplex use 802.3x flow control, half-duplex ports use backpressure flow config, and

Auto ports use an automatic selection of the two. The default is Disabled.

Address Learning Enable or disable MAC address learning for the selected ports. When Enabled, destination

and source MAC addresses are automatically listed in the forwarding table. When address

learning is Disabled, MAC addresses must be manually entered into the forwarding table.

This is sometimes done for reasons of security or efficiency. See the section on

Forwarding/Filtering for information on entering MAC addresses into the forwarding table.

The default setting is Enabled.

Medium Type

If configuring the Combo ports, this defines the type of transport medium to be used,

whether Copper or Fiber.

Auto Negotiation

Use the drop-down menu to specify the auto-negotiation configuration.

Restart An – Select to restart the auto-negotiation process

Remote Fault Advertisedt - The remote fault advertisement option will be configured.

Click Apply to implement the new settings on the Switch.

Click the Refresh button to refresh the display section of this page.

Port Description Settings

The Switch supports a port description feature where the user may name various ports.

To view the following window, click Configuration > Port Configuration > Port Description:

Figure 2 - 8. Port Description window

Use the From Port and To Port drop-down menu to choose a port or range of ports to describe. Users may then enter a description

for the chosen port(s). If configuring the Combo ports, the Medium Type defines the type of transport medium to be used, whether

Copper or Fiber.

Click Apply to set the descriptions in the Port Description window.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 320 321

Sin comentarios

D-Link DSA-3200 Información técnica Pagina 25