D-Link DIR-68 Manual de usuario descargar pdf (Pagina 18)

14D-Link DIR-610N User Manual

Section 3 - Conguration

Select Static IP from the drop-down menu.

Enter the IP address assigned by your ISP.

Enter the subnet mask assigned by your ISP.

Enter the gateway assigned by your ISP.

Enter the primary DNS server address supplied by your ISP

(Internet Service Provider.)

Enter the secondary DNS server address supplied by your ISP. This

is optional, but may provide more stability should the primary

DNS server fail.

Maximum Transmission Unit - you may need to change the MTU

for optimal performance with your specic ISP. 1500 is the default

MTU.

The default MAC Address is set to the Internet port’s physical

interface MAC address on the router. It is not recommended that

you change the default MAC address unless required to by your

ISP. You can use the Clone Your PC’s MAC Address button to

replace the Internet port’s MAC address with the MAC address of

your Ethernet card.

Click Save Settings to save the current conguration, or click

Don’t Save Settings to discard any changes that have been made.

My Internet

Connection is:

IP Address:

Subnet Mask:

Default Gateway:

Primary DNS

Server:

Secondary DNS

Server:

MTU:

MAC Address:

Static IP Address

Choose Static IP Address if your ISP has provided you with a full set of IP address information. You will need to enter in the IP

address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds

must be in the appropriate IP format, which is four octets each separated by a dot (x.x.x.x). The router will not accept an IP

address if it is not in this format.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 74 75

Sin comentarios

D-Link DIR-68 Manual de usuario Pagina 18