D-Link DIR-68 Manual de usuario descargar pdf (Pagina 19)

15D-Link DIR-610N User Manual

Section 3 - Conguration

Dynamic IP Address (DHCP)

Select Dynamic IP (DHCP) to obtain IP address information

automatically from your ISP. Select this option if your ISP did not

provide you with any IP numbers to use. This option is commonly

used for cable modem services.

The host name is optional but may be required by some ISPs.

Enter the primary DNS server address provided to you by your ISP.

Enter the secondary DNS server address provided to you by your

ISP. This is optional, but may provide more stability should the

primary DNS server fail.

Maximum Transmission Unit - you may need to change the MTU

for optimal performance with your specic ISP. 1500 is the default

MTU.

The default MAC address is set to the Internet port’s physical

interface MAC address on the router. It is not recommended that

you change the default MAC address unless required by your ISP.

You can use the Clone Your PC’s MAC Address button to replace

the Internet port’s MAC address with the MAC address of your

Ethernet card.

Click Save Settings to save the current conguration, or click

Don’t Save Settings to discard any changes that have been made.

My Internet

Connection is:

Host Name:

Primary DNS

Server:

Secondary

DNS Server:

MTU:

MAC Address:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 74 75

Sin comentarios

D-Link DIR-68 Manual de usuario Pagina 19