
23D-Link DIR-610N User Manual
Section 3 - Conguration
The frequency of the wireless band being congured.
Check this box to enable the wireless function of your router.
The network name (SSID) of your wireless network. This name will
identify your wireless network.
Select one of the following:
802.11b Only - Select if you are only using 802.11b clients.
802.11g Only - Select if you are only using 802.11g clients.
802.11n Only - Select if you are only using 802.11n clients.
802.11 Mixed (g/b) - Select if you are using both 802.11b and
802.11g wireless clients.
802.11 Mixed (g/n) - Select if you are using both 802.11g and
802.11n wireless clients.
802.11 Mixed(n/g/b) - Select if you are using a mix of 802.11n,
11g, and 11b wireless clients.
The Auto Channel Scan setting can be selected to allow the router
to choose the channel with the least amount of interference.
Indicates the channel setting for the router. By default the channel
is set to 6. The channel can be changed to t the channel setting for
an existing wireless network or to customize the wireless network.
If you enable Auto Channel Scan, this option can not be selected.
Select the wireless data transmission rate. It is strongly suggested
to select Best (Auto) for best performance.
Select the bandwidth of the wireless channel. It is recommended
that this option is set to 20/40 MHz (Auto) for best performance.
Select Visible to have the router broadcast your SSID to clients
within the range of your wireless network. This means that wireless
Wireless Band:
Enable Wireless:
Wireless Network
Name:
802.11 Mode:
Enable Auto
Channel Scan:
Wireless Channel:
Transmission
Rate:
Channel Width:
Visibility Status:
If you do not wish to enable WDS, you can congure the wireless settings of your router on this page. The following options will be available for
conguration.
Comentarios a estos manuales