D-Link DIR-68 Manual de usuario descargar pdf (Pagina 25)

21D-Link DIR-610N User Manual

Section 3 - Conguration

Manual Wireless Network Setup

Wireless Distribution System (WDS) enables you to use an existing

wireless network as the WAN source for your router. This option is

typically used if you wish to use Extender Mode to extend the reach

of an existing wireless network. Check the box to enable WDS.

Enter the network name (SSID) of the wireless network which you

want to connect to as your source network. You can also click on

the Site Survey button to bring up a list of wireless networks

within range of your router.

Select the security mode used by the source wireless network.

Select Auto to have the router automatically select the WPA mode

based on clients connecting to it, or manually force the router to

use WPA Only or WPA2 Only.

Select the cipher type used by the source wireless network.

Enter the pre-shared key of the source network.

The settings for the extended network such as SSID, channel width,

and security mode will remain the same as the source network

and cannot be adjusted.

Enable WDS:

Wireless

Network Name:

Security Mode:

WPA Mode:

Cipher Type:

Pre-Shared Key:

Extend SSID:

From the Wireless Network page, you can manually congure your wireless network settings. At any time, you can click the

Save settings button to save the current conguration and return to the main page, or click Don’t Save Settings to discard

any changes and return to the main page.

If you wish to enable WDS in order to extend an existing wireless network, the following options will be available for conguration.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 74 75

Sin comentarios

D-Link DIR-68 Manual de usuario Pagina 25