D-Link DSA-3200 Manual de usuario descargar pdf (Pagina 26)

VARIABLE FORMAT <code>

VALID VALUES 0, or 1

DEFAULT VALUE 0

DATA TYPE Integer

DESCRIPTION Determines if data are to be scrolled on the display. ASCII Output only

0 - data are scrolled

1 - data are displayed in place, form atted for a VT100 terminal.

VARIABLE F P S

VALID VALUES 0 to 2147483648

DEFAULT VALUE 100

DATA TYPE long integer

DESCRIPTION Frames per Scan. Sets the number of averaged frames to send to the host

computer when a scan command is issued. Averaged Frames will be sent

to the host computer until the value of FPS is met. At that time the DSA will

exit the scan mode and wait for another command. If a 0 is entered, the

scan will continue until a STOP command is received.

VARIABLE PAGE

VALID VALUES 0 or 1

DEFAULT VALUE 0

DATA TYPE integer

DESCRIPTION W hen set to 1, the DSA will accumulate 10 frames of data before the data

is sent over the network. If FPS is set to a number less than 10, the data will

be sent over the network when FPS is completed. W hen a STOP command

is issued, the frame acquisition will stop on a 10 frame boundary.

NOTE: This variable is active in UDP mode only.

VARIABLE PERIOD

VALID VALUES 125 to 65535 microseconds

DEFAULT VALUE 500

DATA TYPE integer

DESCRIPTION Sets the interval between channel samples. Period is related to the scan

rate, or frequency by the formula:

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Sin comentarios

D-Link DSA-3200 Manual de usuario Pagina 26